濟南玻璃鋼雕塑如何和混凝土固定？

2022-11-19 17:08:29

659次

山東玻璃鋼雕塑 http://m.emufurniture.cn/和混凝土固定主要有兩種方法，下面濟南旭日雕塑藝術有限公司的專家給大家詳細分析一下。

1、一種是比較穩(wěn)定的，上輕下重而且落地面積比較大的山東玻璃鋼雕塑，在底部打鐵膨脹螺絲，通過電焊與雕塑鋼龍骨焊接起來就可以。
A relatively stable, under the light weight and landing area is relatively large Shandong glass and steel sculpture, at the bottom of the blacksmith expansion screws, by welding and sculpture of steel keel welded together can be.

2、另一種是上面不輕，底部不大的重心不是很穩(wěn)定的山東玻璃鋼雕塑，落地面要有鋼板與內部龍骨焊接的很牢固，地面要有預埋鐵，由上面鋼板下面帶多根拐彎的螺紋鋼埋入混凝土下很深的結構構成，兩層鋼板焊接牢固，基礎外面再貼石材或種花草掩埋露出雕塑外的鋼結構。
The other one is not above the light, the bottom is not the center of gravity is not very stable Shandong glass and steel sculpture, floor to have welding steel plate and the inside the keel is very strong, the ground should be a pre buried iron, from the above just below the plate with a plurality of Turning Thread steel embedded in concrete under deep structure into, two layers of steel plate welding firm, based outside paste stone or flowers buried to expose the sculpture of steel structure.